Quick Tile Calculator

Tile Calculator

Enter the area and your tile size. See exactly how much tile to buy.

  • Free
  • No sign-up or login
  • Just type and see the answer
Area to tile

Floor or wall. Measure edge to edge.

Tile sizeInches
Layout patternNot sure? Keep Straight
More options
You need to buy
66tiles

See the math

    Start from an example

    Pick the job closest to yours, then change the numbers.

    Why you buy extra tile

    Tiles along the walls get cut to fit, and the offcuts are often too small to reuse. Angled patterns cut more tiles, so they need more extra.

    Whole tileTile that gets cut

    Same 10 × 12 ft floor in 12 × 24 in tile, four layouts
    LayoutPieces cut at the edgesExtra to addTiles to buy
    Straight1510%66
    Brick (offset)2110%66
    Diagonal4015%69
    Herringbone3715%69

    60 tiles cover the floor in every layout. Diagonal and herringbone cut far more tiles, so they need 15% extra instead of 10%. Bob Vila suggests 10–20% and Best Tile 10%, or 15% for diagonal layouts and rooms with many corners.

    How to calculate how many tiles you need

    Divide the area by what one tile covers (including the grout joint), round up, then add 10% for a straight or brick layout or 15% for diagonal or herringbone.

    1. Measure the area. Multiply length by width: a 10 ft × 12 ft floor is 120 sq ft. Add up every area you are tiling and take away doors, windows or a tub.
    2. Work out what one tile covers. A 12 × 24 in tile with a 1/8 in joint takes up 12.125 × 24.125 ÷ 144 = 2.03 sq ft.
    3. Divide and round up. 120 ÷ 2.03 = 59.1, so 60 tiles cover the floor.
    4. Add extra for cuts and breakage. 60 + 10% = 66 tiles.
    5. Turn tiles into boxes. Divide by the tiles per box on the label and round up. At 8 tiles a box, 66 tiles is 9 boxes (72 tiles).

    For a straight layout the calculator also counts the edge pieces in the drawing. If the cuts along the walls need more whole tiles than the percentage allows, it shows the higher number.

    How many tiles for common room sizes

    Tiles to buy with 10% extra, straight layout. The small figure shows the tiles that cover the floor plus the extra.

    Feet and inches, 1/8 in grout joint
    RoomArea12 × 12 in12 × 24 in24 × 24 in6 × 24 in
    5 × 8 ft40 sq ft4440 + 42220 + 21110 + 14339 + 4
    8 × 10 ft80 sq ft8779 + 84440 + 42220 + 28678 + 8
    10 × 10 ft100 sq ft10898 + 105550 + 52825 + 310898 + 10
    10 × 12 ft120 sq ft130118 + 126660 + 63330 + 3129117 + 12
    12 × 12 ft144 sq ft157142 + 157971 + 84036 + 4156141 + 15
    12 × 15 ft180 sq ft195177 + 189889 + 95045 + 5194176 + 18
    15 × 20 ft300 sq ft324294 + 30163148 + 158375 + 8323293 + 30
    Metres and centimetres, 3 mm grout joint
    RoomArea30 × 30 cm30 × 60 cm60 × 60 cm60 × 120 cm
    2 × 2.5 m5 m²6155 + 63128 + 31614 + 2107 + 3 *
    3 × 3 m9 m²10999 + 105550 + 52825 + 31513 + 2
    3.6 × 3 m10.8 m²130118 + 126660 + 63330 + 31715 + 2
    4 × 4 m16 m²193175 + 189788 + 95045 + 52623 + 3
    5 × 4 m20 m²240218 + 22121110 + 116256 + 63128 + 3

    * Large tiles in a small room: the edge pieces need more whole tiles than 10% allows, so the count is higher. Room not listed? Type it into the calculator above.

    How much area does one tile cover?

    Use this to compare tile sizes or check a quote. Counts include a 1/8 in grout joint.

    Tile sizeOne tile coversTiles per 100 sq ftWith 10% extraTiles per 10 m²
    3 × 6 in0.125 sq ft753829810
    4 × 4 in0.111 sq ft847932911
    4 × 12 in0.333 sq ft288317310
    6 × 6 in0.25 sq ft384423414
    6 × 24 in1 sq ft98108105
    8 × 48 in2.667 sq ft374140
    12 × 12 in1 sq ft98108106
    12 × 24 in2 sq ft505553
    18 × 18 in2.25 sq ft444948
    24 × 24 in4 sq ft252827
    24 × 48 in8 sq ft131514

    Floors, walls, showers and backsplashes

    The maths is the same everywhere. What changes is how you measure.

    Floor

    Measure wall to wall at floor level. Split an L-shaped room into rectangles and add each one with Add another area. Include the doorway if the tile runs under the door.

    Wall

    Measure the width and the height you are tiling. Take away doors and windows under More options. Wall tile is often small, so many tiles get cut at the edges: keep at least 10% extra.

    Shower and tub surround

    Add each wall as its own area: the back wall and both end walls, up to the height you tile (often 72 in above the tub, or the full height in a walk-in shower). Add the shower floor separately if it uses the same tile.

    Backsplash

    Measure each run of wall between the counter and the cabinets, often about 18 in high, and add the runs together. Take away a window. For mosaic sheets, enter the sheet size as the tile size.

    What this tile calculator does

    Made for homeowners and DIYers who want a quick answer they can trust before ordering tile, and for contractors checking an order.

    • Floors and walls, including showers, tub surrounds and backsplashes
    • Several areas added together, minus doors and windows
    • Common tile sizes in one tap, or any custom size
    • Feet and inches, or metres and centimetres
    • Straight, brick, diagonal and herringbone layouts with the right extra added
    • Tiles to buy, area to buy, boxes from the box label and total cost
    • A to-scale drawing that shows whole tiles and cut tiles
    • Free, with no sign-up or login, and works on a phone

    Last updated 15 November 2026. Every number in the tables comes from this calculator. Waste guidance: Bob Vila, Best Tile.

    Common questions

    How many tiles do I need?

    How many tiles do I need for a 10 x 10 room?

    A 10 × 10 ft room is 100 sq ft. In a straight layout with 10% extra you need about 55 tiles of 12 × 24 in, 108 tiles of 12 × 12 in or 28 tiles of 24 × 24 in. Diagonal or herringbone layouts need about 15% extra instead.

    How much extra tile should I buy?

    About 10% for a straight or brick layout and about 15% for diagonal or herringbone. Buy a little more for a small room or one with many corners.

    How many boxes is that?

    Type the number of tiles or the area printed on the box label into the calculator. It rounds up to full boxes for you.

    How do I measure an L-shaped room or a shower?

    Split it into rectangles. Choose Add another area for each rectangle or wall, and the calculator adds them together.

    Do I need to sign up or log in?

    No. The calculator is free and works straight away. There is no account, no sign-up and no login, and the numbers you type stay in your browser.

    I only know the total area. Can I use that?

    Yes. Use the link under the area boxes to enter the total area instead of the length and width.